Ports across the U.S. are pursuing cleaner operations through zero-emission equipment, charging infrastructure and emissions-reduction initiatives. From forklifts inside warehouses to yard tractors moving containers and Class 8 drayage trucks transporting cargo between ports, rail yards and distribution centres, electrification is changing how freight moves through the supply chain.
Replacing diesel equipment with electric alternatives is only part of the challenge. Operators need to identify the right equipment for their duty cycles, plan charging infrastructure, make the economics work and measure the environmental benefits of their investments.
A useful starting point is the Volvo LIGHTS project, which tested electric forklifts, yard tractors and trucks in real freight operations in Southern California.¹ It found that energy and cost savings are achievable, but depend on the application and operating constraints.
Newer research from NACFE, the International Council on Clean Transportation (ICCT) and other researchers builds on those findings. Together, these studies point to a broader transition: successful electrification requires the right equipment, the right financing and connected data to optimise operations and measure environmental impact.
Start with the equipment and its duty cycle
Not every vehicle or machine needs the same electrification strategy.
Forklifts often operate in warehouses and distribution centres, with predictable routes and regular charging opportunities. Yard tractors move containers around terminals and logistics facilities, frequently following repetitive operating patterns. Drayage trucks face a wider range of demands, from short trips between ports and nearby warehouses to longer regional routes.
Daily mileage, operating hours, payload, energy consumption, downtime and access to charging all influence whether an electric alternative will work in practice.
For many operations, forklifts and yard tractors offer a logical starting point. They allow fleets to build experience with electric equipment, charging and maintenance before moving into more demanding heavy-duty truck applications.
The objective isn’t simply to electrify as much equipment as possible. It’s to identify which assets can be electrified most effectively, and under what operating conditions.
What the Volvo LIGHTS study taught us
The Volvo LIGHTS project tested electric equipment in real freight operations near the San Pedro Bay Ports. Its findings were presented at EVS35 in 2022 in The Zero-Emission Freight Revolution: California Case Studies, by a team from CALSTART (now Catalyst Mobility), UC Riverside and Volvo Group North America,¹ and documented in full in the project’s Summary Report, published in December 2022.² Together they cover battery-electric forklifts, yard tractors, Class 7 box trucks and Class 8 tractors, including trucks on port drayage routes in Southern California.
Several findings illustrate both the opportunities and the challenges:
- Forklifts: Electric models saved approximately $2.54–$3.17 per operating hour in fuelling and maintenance compared with propane-powered counterparts.²
- Yard tractors: Electric equipment typically used around 6–15 kWh per operating hour, compared with approximately 31–42 kWh-equivalent for diesel equipment.¹
- Class 7 trucks: The electric box truck averaged about 66 miles per day, with a maximum recorded range of 120 miles on a single charge.¹
- Class 8 trucks: Electric tractors were assigned shorter routes than their diesel counterparts. The longest day recorded was 202 miles, including multiple opportunity charges.²
- Total cost of ownership: Despite lower energy and maintenance costs, most of the electric trucks were not expected to reach cost parity with diesel under 2022 assumptions, mainly because of higher upfront and insurance costs.¹
Range and cost context: Electric truck ranges have improved since 2022, and manufacturers now advertise longer ranges for many Class 7 and Class 8 models. Real-world range still depends on payload, route, weather and driving style. The study’s cost findings reflect 2022 prices and incentives. Today’s economics depend on vehicle prices, financing, energy costs, charging infrastructure and available incentives.
These findings are specific to the vehicles, routes, incentives and operating conditions studied. Their lasting lesson is that energy costs, utilisation, charging time and incentives all influence the business case.
Newer research shows how the market is progressing
Since Volvo LIGHTS, additional research has examined how fleets are moving from demonstrations towards wider adoption, and what it takes to electrify heavier trucks.
Yard tractors: Moving beyond the pilot stage
NACFE’s September 2026 report, Beyond the Pilot: Electric Terminal Tractor Adoption, Four Years Later, revisits the market four years after its initial terminal tractor study.³
Among surveyed fleets:
- 76% reported at least moderate operating-cost savings compared with diesel.
- 54% had progressed beyond pilot projects to partial deployment or full standardisation.
- 58% had adopted electric terminal tractors before other battery-electric vehicle types, or had electrified terminal tractors exclusively.
The report suggests that yard tractors are becoming a proving ground for broader fleet electrification, with energy and maintenance savings helping drive adoption.
Drayage trucks: Match battery and charging to the route
An August 2026 ICCT study⁴ used telematics data from 10 trucks in the Seattle–Tacoma port region to model energy requirements across three operating categories.
The study concluded that battery-electric drayage trucks are an increasingly practical solution for decarbonising port operations in the Seattle–Tacoma region. Local routes were the most straightforward to electrify, while short-haul operations also showed potential. Regional routes presented greater challenges and could require larger batteries and strategically located high-power charging infrastructure.
A separate 2025 study⁵ of 1,051 Southern California drayage trucks found that approximately 95% could potentially be electrified in a modelled scenario using 800-kWh batteries and a combination of depot and off-site charging with 350-kW chargers.
That is modelled potential, not a current adoption rate or a guarantee of commercial viability. Nevertheless, it highlights the importance of charging access and infrastructure alongside vehicle capability.
The takeaway: Fleet electrification should be planned around real operational data, rather than manufacturer range specifications or vehicle purchase prices alone.
Charging infrastructure is part of the solution
Electric vehicles cannot deliver their full potential without charging infrastructure that fits the way a port operates.
For forklifts and yard tractors, charging can be scheduled around breaks, shift changes and periods of lower utilisation. For drayage trucks, operators must coordinate charging with dispatch schedules, terminal appointments, warehouse deliveries and return trips.
Key considerations include:
- Available electrical capacity and the cost of grid upgrades.
- Charger location, power and expected demand.
- Time available for charging between shifts or routes.
- Whether depot charging, shared charging hubs or both are needed.
- How infrastructure requirements will grow as more vehicles are electrified.
Planning for these requirements early helps port operators align infrastructure investment with operational needs and the pace of electrification.
Asset and performance tracking: Connecting equipment, batteries and operations
Once electric equipment is in operation, port operators need visibility into how assets are being used, how they are performing and when they are ready for work.
The most useful data typically covers asset utilisation, charger performance, battery health and energy consumption.
Connecting these insights helps port operators make better-informed decisions about asset deployment, maintenance and daily operations. For example, knowing which trucks are sufficiently charged for upcoming routes or which yard tractors are available for container movements can improve coordination and reduce avoidable downtime.
The same operational data can support financing decisions by giving funders better visibility into how financed assets are being used and performing.
From electrification to measurable emissions reductions
Electrification can reduce diesel consumption and tailpipe emissions, including nitrogen oxides (NOx) and particulate matter. But the benefits need to be measured if organisations are to understand their impact, communicate results and demonstrate progress.
A credible measurement approach starts with an emissions baseline for the equipment being replaced. It then uses operating information (such as fuel consumption, mileage, engine hours, equipment type and location) to estimate the difference between the baseline and the electrified operation.
Tracking and mapping these savings helps organisations connect equipment activity with estimated emissions reductions and see where those reductions occur.
This can help ports and fleet operators move beyond reporting how many electric vehicles were purchased and towards understanding their environmental impact.
Organisations can use this approach to:
- Establish a consistent emissions baseline before equipment replacement.
- Track estimated NOx savings as equipment is electrified.
- Map the geographic distribution of estimated reductions across terminals and freight corridors.
- Monitor how results change as more equipment is deployed.
- Provide supporting evidence for environmental reporting and funding programmes.
Mapping is particularly valuable for understanding where estimated reductions occur and communicating potential benefits to port authorities, local communities and other stakeholders.
Calculations should use transparent methods and appropriate emissions factors. Tailpipe NOx reductions should also be distinguished from greenhouse gas emissions associated with electricity generation over the wider energy lifecycle.
Environmental reporting and incentives: Proving the impact
Public funding has played a big part in early port electrification, and it usually comes with reporting obligations. Projects funded through the EPA’s Clean Ports Programme, which awarded nearly $3 billion to 53 projects in late 2024, are now in implementation and must report on progress regularly. State and local incentive programmes often carry similar requirements. California’s new Clean Fuel Reward programme adds further support, offering rebates on new electric medium- and heavy-duty trucks, including drayage trucks, with more than $1 billion expected through 2030.
With less federal funding available for new projects, clear evidence of results matters even more when competing for state and local support.
Depending on the programme, project sponsors may need to show baseline conditions, equipment deployment, emissions reductions and progress against approved objectives. Requirements differ by funding source, jurisdiction and award.
A structured evidence base can help with:
- Documenting equipment deployment and operating activity.
- Estimating and tracking emissions reductions using a consistent methodology.
- Showing where environmental benefits occur.
- Compiling supporting information for project reporting and funding applications.
Accurate tracking can strengthen transparency and accountability, but it does not by itself guarantee grant eligibility or regulatory compliance.
Making the economics work: Financing that follows the asset
The business case for electrification extends beyond the purchase price of a truck or forklift. Operators need to weigh equipment and charging costs against energy, maintenance, utilisation, downtime, incentives and residual value.
For many drayage operators, the upfront cost is the biggest hurdle. Independent operators and smaller fleets often run on tight margins, and a large fixed monthly payment on an electric truck can feel like a risky bet on technology they haven’t run before.
Financing can take some of that risk out. When repayments are linked to how an asset is actually used, costs follow the revenue the equipment earns. Funders, in turn, need confidence that the asset is performing as expected, which is where live operational data comes in.
That link between usage, performance and payment is what turns the data described above into something commercially valuable.
Where Zeti comes in: Connecting electrification, financing and performance
Zeti connects equipment acquisition, financing, operational performance and emissions reporting in one approach to zero-emission port operations.
ZetiOS connects to zero-emission vehicles and equipment to track location, utilisation, battery health, charging activity and idling. By bringing this data together, ZetiOS helps port and fleet operators monitor performance, make operational decisions and produce reports for federal, state and local agencies.
Specifically, Zeti enables a connected approach across three activities:
- Financing
Connect equipment acquisition with financing solutions that reflect asset costs, expected performance, utilisation and available incentives. - Asset and performance tracking
Track asset location, utilisation, energy consumption, charging activity, battery health and idling. These insights help operators plan equipment deployment, charging and maintenance, while giving funders greater visibility into asset performance. - Emissions reporting and mapping
Use operational data to support reporting to federal, state and local agencies. Generate custom reports using metrics such as time at port, trip counts and time spent in priority environmental areas. Track estimated NOx reductions and map their geographic distribution to support emissions reporting, grant reporting and environmental impact assessments.
See the bigger picture, and the local impact. Map estimated NOx reductions across whole regions, down to individual neighborhoods and disadvantaged communities.
Together, these capabilities connect decisions that are often made separately. Equipment selection influences operating performance; performance affects the economics of financing; asset and battery data inform charging and scheduling; and emissions tracking helps quantify environmental outcomes.
This is especially important as ports move from individual electric vehicles to larger fleets, where equipment availability, charging coordination and measurable results become increasingly interconnected.
Electrification needs a connected approach
The evidence from Volvo LIGHTS and newer research shows that port electrification is not a single technology decision. Electric forklifts and yard tractors may offer practical starting points, while drayage trucks require closer coordination of routes, batteries, charging infrastructure and investment.
The next challenge is scaling deployment while demonstrating that investments deliver the expected operational and environmental benefits.
That means selecting the right equipment, arranging appropriate financing, tracking asset and battery performance, coordinating charging with logistics, and documenting emissions reductions.
Replacing diesel equipment is the visible part of the transition. Making it pay, and proving what it achieved, depends on connecting acquisition, financing, operations and environmental reporting.
Sources
- Jon Gordon et al. (CALSTART, UC Riverside, Volvo Group North America), The Zero-Emission Freight Revolution: California Case Studies, 35th International Electric Vehicle Symposium and Exhibition (EVS35), Oslo, Norway, June 2022. Link
- CALSTART, Volvo LIGHTS Project: Summary Report, December 2022. Link
- North American Council for Freight Efficiency (NACFE), Beyond the Pilot: Electric Terminal Tractor Adoption, Four Years Later, September 2026. Link
- Anish Sinha, International Council on Clean Transportation (ICCT), Preparing for battery-electric drayage trucks: Technical feasibility in the Seattle-Tacoma port region, August 11, 2026. Link
- Guoliang Feng, Craig Ross Rindt and Stephen G. Ritchie, From diesel to electric: potential of drayage trucks transition in Southern California, iScience, 2025. Link




